TTC Performance Water Pump Pully Cover, MKIV Supra

Take a look at your engine bay and you will notice your ugly and uncovered water pump pulley. This unique product from TTC Performance solves this for a very affordable price.

Installation instructions: 1. Remove accessory belt. 2. Remove stock nuts from stock studs, and remove water pump pulley. 3. Remove stock studs from water pump assembly. 4. Replace water pump pulley and pulley cover onto water pump assembly. 5. Secure with 8x1.25x15mm socket head cap screws (not provided in kit). *Note* If using the stock water pump pulley, use a 1/4 inch spacer between the cover bolt holes and the pulley bolt holes. Washers are highly recommended. The stock pulley face is shaped differently from any aftermarket lightened pulley. 6. Snug socket head cap screws, but do not tighten. 7. Reinstall accessory belt 8. Tighten socket head cap screws completely. 9. Start motor, you are finished.

Expected availability is January 30th.